Filters
Close

Tripp Lite 1000VA 750W 230V Lithium Ion UPS Smart Tower Hospital Medical

Tripp Lite 1000VA 750W 230V Lithium Ion UPS Smart Tower Hospital Medical - 1000 VA/750 W - 220 V AC, 230 V AC, 240 V AC - 11 Minute Stand-by Time - Tower - 6 x IEC 60320 C13
SKU: 1000263520
Manufacturer part number: SMX1200XLHGL
Free shipping
Manufacturer: Tripp Lite
Old price: $3,115.84
$1,961.05
Picture of Tripp Lite 1000VA 750W 230V Lithium Ion UPS Smart Tower Hospital Medical

1kVA/750W Medical-Grade UPS Allows Time to Back Up Critical Files During a Blackout

This 230V SmartPro® hospital-grade UPS is fully compliant with UL 60601-1 regulations when plugged into a hospital-grade outlet, which makes it ideal for use in medical facilities, including patient care vicinities. It allows you to work through short power failures, and gives you enough time to safely save files and shut down your system in case of a prolonged blackout.

Long-Lasting LiFePhos Battery Handles up to 10,000 Cycles with Ease

This UPS system for hospitals contains a replaceable lithium iron phosphate (LiFePhos) internal battery that provides up to 30 times the cycle life of traditional sealed lead acid (SLA) batteries. The 6-outlet UPS system provides up to 28 minutes of battery backup at half load and 10 minutes at full load. During normal operation, incoming utility power keeps the replaceable internal battery fully charged, so backup power will always be available.

Automatic Voltage Regulation (AVR) Corrects Potentially Hazardous Voltage Fluctuations

AVR protects your equipment from incremental hardware damage, data loss and performance problems caused by brownouts. This UPS for medical equipment can correct brownouts as low as 155V and overvoltages as high as 274V back to nominal 230V power without drawing on the battery backup needed to support your equipment during a blackout.

Built-In Isolation Transformer Offers Full Isolation

The isolation transformer with Faraday shield offers full isolation and removes common mode noise while maintaining full AC surge suppression in all modes. Cumulative leakage current of all connected equipment is less than 100 microamps.

Connect Your Equipment to 6 IEC 320 C13 Outlets

Six C13 hospital-grade outlets provide both battery backup and surge protector for your mobile medical equipment, such as computers, monitors and lab equipment. A 340-joule surge suppression rating protects connected components from the harmful effects of power surges.

Combats Electromagnetic Interference That Can Harm Equipment

Various electromagnetic and radio sources found in virtually every home and business can cause disruptive interference on the AC line. Known as EMI (electromagnetic interference) and RFI (radio frequency interference), this line noise is a common cause of performance problems and can lead to incremental hardware damage, data corruption and audio/video transmission problems. This medical-grade UPS system incorporates technology that filters out disruptive line noise so that it won't affect your equipment.

Easy-to-Read LEDs and Alarm Report Real-Time UPS and Power Status

Front-panel LED indicators monitor essential information, such as line power, battery power, overload, voltage regulation and battery low/replace status. An audible alarm will sound in case of low battery, excessive load and power failure.

Saves Your Files, Even When You're Away

USB and DB9 serial ports connect to your computer with the included cables. These ports communicate with Tripp Lite's free downloadable PowerAlert® software for safe, unattended system shutdown and file saves in the event of a prolonged power failure.

Tower Form Factor for Easy Placement on a Nurse's Station or Mobile Medical Cart

The long-lasting PVC housing fits easily on a desktop, shelf or anywhere else power is needed. The 15-centimeter (six-inch) dongle with hospital-grade C14 plug connects to a properly grounded AC wall outlet.

Product Information

Transource eSKU1054127418
ManufacturerTripp Lite by Eaton
Manufacturer Part NumberSMX1200XLHGL
Manufacturer Website Addresshttp://www.tripplite.com
Brand NameTripp Lite
Product LineSmartPro
Product SeriesSMX
Product ModelSMX1200XLHGL
Product NameSmartPro SMX1200XLHGL 1000VA Tower UPS
Product TypeLine-interactive UPS

Specifications

Technical Information
Plug/Connector TypeIEC 60320 C14
Receptacle TypeIEC 60320 C13
Receptacle Detail6 x IEC 60320 C13
PhaseSingle Phase
Application/UsageMedical
Application/UsageComputer
Application/UsageMonitor
Application/UsageLab Equipment
Power Description
Load Capacity1000 VA/750 W
Input Voltage230 V AC
Output Voltage220 V AC
Output Voltage230 V AC
Output Voltage240 V AC
Waveform TypePulse-width Modulated Sine Wave
Battery Information
Backup/Run Time (Full Load)11 Minute
Typical Battery Recharge Time4.50 Hour
Hot SwappableYes
Physical Characteristics
Height12.7"
Width7.5"
Depth9.1"
Form FactorTower
Weight (Approximate)45.50 lb
Miscellaneous
Package Contents
  • SmartPro SMX1200XLHGL 1000VA Tower UPS
  • USB Monitoring Cable, 1.8 m (6 ft.)
  • DB9 Serial Monitoring Cable, 1.8 m (6 ft.)
  • Owner's Manual
Environmentally FriendlyYes
Environmental CertificationRoHS
Country of OriginChina
Warranty
Limited Warranty2 Year

1kVA/750W Medical-Grade UPS Allows Time to Back Up Critical Files During a Blackout

This 230V SmartPro® hospital-grade UPS is fully compliant with UL 60601-1 regulations when plugged into a hospital-grade outlet, which makes it ideal for use in medical facilities, including patient care vicinities. It allows you to work through short power failures, and gives you enough time to safely save files and shut down your system in case of a prolonged blackout.

Long-Lasting LiFePhos Battery Handles up to 10,000 Cycles with Ease

This UPS system for hospitals contains a replaceable lithium iron phosphate (LiFePhos) internal battery that provides up to 30 times the cycle life of traditional sealed lead acid (SLA) batteries. The 6-outlet UPS system provides up to 28 minutes of battery backup at half load and 10 minutes at full load. During normal operation, incoming utility power keeps the replaceable internal battery fully charged, so backup power will always be available.

Automatic Voltage Regulation (AVR) Corrects Potentially Hazardous Voltage Fluctuations

AVR protects your equipment from incremental hardware damage, data loss and performance problems caused by brownouts. This UPS for medical equipment can correct brownouts as low as 155V and overvoltages as high as 274V back to nominal 230V power without drawing on the battery backup needed to support your equipment during a blackout.

Built-In Isolation Transformer Offers Full Isolation

The isolation transformer with Faraday shield offers full isolation and removes common mode noise while maintaining full AC surge suppression in all modes. Cumulative leakage current of all connected equipment is less than 100 microamps.

Connect Your Equipment to 6 IEC 320 C13 Outlets

Six C13 hospital-grade outlets provide both battery backup and surge protector for your mobile medical equipment, such as computers, monitors and lab equipment. A 340-joule surge suppression rating protects connected components from the harmful effects of power surges.

Combats Electromagnetic Interference That Can Harm Equipment

Various electromagnetic and radio sources found in virtually every home and business can cause disruptive interference on the AC line. Known as EMI (electromagnetic interference) and RFI (radio frequency interference), this line noise is a common cause of performance problems and can lead to incremental hardware damage, data corruption and audio/video transmission problems. This medical-grade UPS system incorporates technology that filters out disruptive line noise so that it won't affect your equipment.

Easy-to-Read LEDs and Alarm Report Real-Time UPS and Power Status

Front-panel LED indicators monitor essential information, such as line power, battery power, overload, voltage regulation and battery low/replace status. An audible alarm will sound in case of low battery, excessive load and power failure.

Saves Your Files, Even When You're Away

USB and DB9 serial ports connect to your computer with the included cables. These ports communicate with Tripp Lite's free downloadable PowerAlert® software for safe, unattended system shutdown and file saves in the event of a prolonged power failure.

Tower Form Factor for Easy Placement on a Nurse's Station or Mobile Medical Cart

The long-lasting PVC housing fits easily on a desktop, shelf or anywhere else power is needed. The 15-centimeter (six-inch) dongle with hospital-grade C14 plug connects to a properly grounded AC wall outlet.

Product Information

Transource eSKU1054127418
ManufacturerTripp Lite by Eaton
Manufacturer Part NumberSMX1200XLHGL
Manufacturer Website Addresshttp://www.tripplite.com
Brand NameTripp Lite
Product LineSmartPro
Product SeriesSMX
Product ModelSMX1200XLHGL
Product NameSmartPro SMX1200XLHGL 1000VA Tower UPS
Product TypeLine-interactive UPS

Specifications

Technical Information
Plug/Connector TypeIEC 60320 C14
Receptacle TypeIEC 60320 C13
Receptacle Detail6 x IEC 60320 C13
PhaseSingle Phase
Application/UsageMedical
Application/UsageComputer
Application/UsageMonitor
Application/UsageLab Equipment
Power Description
Load Capacity1000 VA/750 W
Input Voltage230 V AC
Output Voltage220 V AC
Output Voltage230 V AC
Output Voltage240 V AC
Waveform TypePulse-width Modulated Sine Wave
Battery Information
Backup/Run Time (Full Load)11 Minute
Typical Battery Recharge Time4.50 Hour
Hot SwappableYes
Physical Characteristics
Height12.7"
Width7.5"
Depth9.1"
Form FactorTower
Weight (Approximate)45.50 lb
Miscellaneous
Package Contents
  • SmartPro SMX1200XLHGL 1000VA Tower UPS
  • USB Monitoring Cable, 1.8 m (6 ft.)
  • DB9 Serial Monitoring Cable, 1.8 m (6 ft.)
  • Owner's Manual
Environmentally FriendlyYes
Environmental CertificationRoHS
Country of OriginChina
Warranty
Limited Warranty2 Year
Categories