Filters
Close

Tripp Lite 1000VA 800W UPS Smart Lithium Ion LiFePO4 AVR LCD USB DB9 2URM

Tripp Lite 1000VA 800W UPS Smart Lithium Ion LiFePO4 AVR LCD USB DB9 2URM - 2U Rack/Tower - AVR - 2.70 Hour Recharge - 8.30 Minute Stand-by - 120 V AC Input - 120 V AC Output - 6 x NEMA 5-15R
SKU: 1000219235
Manufacturer part number: SMART1000RM2UL
Free shipping
Manufacturer: Tripp Lite
Old price: $2,396.16
$1,508.10
Picture of Tripp Lite 1000VA 800W UPS Smart Lithium Ion LiFePO4 AVR LCD USB DB9 2URM

Reliable LiFePO4 Battery Backup Offers Longer Life and Less Weight than Lead Acid Battery

This Tripp Lite SmartPro® UPS lithium battery backup features a state-of-the-art lithium iron phosphate (LiFePO4) internal battery with longer life, more cycles and faster recharge. It more than doubles the service life of an equivalent lead acid battery, and offers up to three times more charge/discharge cycles. It recharges to 100% capacity in less than three hours, making the lithium UPS system an ideal backup in case of power outage. The LiFePO4 battery has 60% the weight of an equivalent lead acid battery, which reduces the overall UPS weight.

120-Volt Battery Backup Keeps Equipment Operating Through Short Power Failures

The SMART1000RM2UL provides up to 20 minutes (half load) and 8.3 minutes (full load) of battery backup, as well as AC power protection, for critical server, network and telecom equipment. In case of a prolonged blackout, the single-phase lithium UPS system gives you enough time to save important data and perform an orderly system shutdown.

Automatic Voltage Regulation (AVR) Conserves Battery Power

With an 800W capacity (1000VA), the line-interactive UPS system with automatic voltage regulation (AVR) maintains regulated 120V nominal output over an input range of 83V-147V without using battery power. Conserving power allows your LiFePO4 battery to last longer and maintain full capacity until needed.

6 Outlets Protect Your Mission-Critical Rack Equipment

Plug your equipment into the six NEMA 5-15R outlets. Four outlets are split into two dual-outlet load banks that are switchable via network interface. These four outlets let you power connected equipment on and off remotely to reset or reboot connected equipment or to shed less significant loads to extend battery runtime for more critical equipment. All six outlets are protected by 570-joule network-grade surge protection to fight off damaging power surges and spikes.

Premium Protection from EMI/RFI Line Noise Helps Your Equipment Perform Better

This UPS system filters out disruptive electromagnetic and radio frequency interference that can inflict hardware damage or data loss. This EMI/RFI filtering also helps your connected components perform better and last longer.

High Efficiency Helps the Environment and Your Cash Flow

Operating with a high 95% line-mode efficiency, the 1kVA UPS system can save BTU heat output and energy costs.

Advanced Communications Ports Connect to Any Workstation or Server

USB and DB9 ports (cables are included) enable data-saving unattended shutdown when used with Tripp Lite's free downloadable PowerAlert® software. Capabilities include detailed monitoring of equipment load levels, self-test data and utility power condition. The Emergency Power Off (EPO) interface offers options for instantaneous power-off of the UPS system and connected equipment in case of fire or other facility emergency.

Optional Network Management Cards Allow Detailed Monitoring of Conditions

The SMART1000RM2UL is compatible with Tripp Lite network management cards, such as WEBCARDLX, for detailed monitoring of UPS and site power conditions.

Product Information

Transource eSKU1054127417
ManufacturerTripp Lite by Eaton
Manufacturer Part NumberSMART1000RM2UL
Manufacturer Website Addresshttp://www.tripplite.com
Brand NameTripp Lite
Product LineSmartPro
Product ModelSMART1000RM2UL
Product NameSmartPro SMART1000RM2UL 1kVA Rack/Tower UPS
Product TypeLine-interactive UPS

Product Specifications

Technical Information
AVRYes
Plug/Connector TypeNEMA 5-15P
Receptacle TypeNEMA 5-15R
Receptacle Detail6 x NEMA 5-15R
Transfer Time4 ms
Application/UsageServer
Application/UsageNetwork
Application/UsageTelecommunication
Power Description
Load Capacity1000 VA/800 W
Input Voltage120 V AC
Input Voltage Range83 V AC - 147 V AC
Output Voltage120 V AC
Waveform TypePure Sine Wave
Battery Information
Battery ChemistryLithium Iron Phosphate (LiFePO4)
Backup/Run Time (Full Load)8.30 Minute
Backup/Run Time (Half Load)20 Minute
Typical Battery Recharge Time2.70 Hour
Physical Characteristics
Height3.5"
Width17.4"
Depth12.5"
Rack Height2U
Form FactorRack/Tower
Weight (Approximate)16.30 lb
Miscellaneous
Package Contents
  • SmartPro SMART1000RM2UL 1kVA Rack/Tower UPS
  • USB Cable
  • DB9 Cable
  • EPO Cable
  • Rack-Mounting Hardware
  • Owner's Manual
Environmentally FriendlyYes
Environmental CertificationRoHS
Country of OriginChina
Warranty
Limited Warranty5 Year

Reliable LiFePO4 Battery Backup Offers Longer Life and Less Weight than Lead Acid Battery

This Tripp Lite SmartPro® UPS lithium battery backup features a state-of-the-art lithium iron phosphate (LiFePO4) internal battery with longer life, more cycles and faster recharge. It more than doubles the service life of an equivalent lead acid battery, and offers up to three times more charge/discharge cycles. It recharges to 100% capacity in less than three hours, making the lithium UPS system an ideal backup in case of power outage. The LiFePO4 battery has 60% the weight of an equivalent lead acid battery, which reduces the overall UPS weight.

120-Volt Battery Backup Keeps Equipment Operating Through Short Power Failures

The SMART1000RM2UL provides up to 20 minutes (half load) and 8.3 minutes (full load) of battery backup, as well as AC power protection, for critical server, network and telecom equipment. In case of a prolonged blackout, the single-phase lithium UPS system gives you enough time to save important data and perform an orderly system shutdown.

Automatic Voltage Regulation (AVR) Conserves Battery Power

With an 800W capacity (1000VA), the line-interactive UPS system with automatic voltage regulation (AVR) maintains regulated 120V nominal output over an input range of 83V-147V without using battery power. Conserving power allows your LiFePO4 battery to last longer and maintain full capacity until needed.

6 Outlets Protect Your Mission-Critical Rack Equipment

Plug your equipment into the six NEMA 5-15R outlets. Four outlets are split into two dual-outlet load banks that are switchable via network interface. These four outlets let you power connected equipment on and off remotely to reset or reboot connected equipment or to shed less significant loads to extend battery runtime for more critical equipment. All six outlets are protected by 570-joule network-grade surge protection to fight off damaging power surges and spikes.

Premium Protection from EMI/RFI Line Noise Helps Your Equipment Perform Better

This UPS system filters out disruptive electromagnetic and radio frequency interference that can inflict hardware damage or data loss. This EMI/RFI filtering also helps your connected components perform better and last longer.

High Efficiency Helps the Environment and Your Cash Flow

Operating with a high 95% line-mode efficiency, the 1kVA UPS system can save BTU heat output and energy costs.

Advanced Communications Ports Connect to Any Workstation or Server

USB and DB9 ports (cables are included) enable data-saving unattended shutdown when used with Tripp Lite's free downloadable PowerAlert® software. Capabilities include detailed monitoring of equipment load levels, self-test data and utility power condition. The Emergency Power Off (EPO) interface offers options for instantaneous power-off of the UPS system and connected equipment in case of fire or other facility emergency.

Optional Network Management Cards Allow Detailed Monitoring of Conditions

The SMART1000RM2UL is compatible with Tripp Lite network management cards, such as WEBCARDLX, for detailed monitoring of UPS and site power conditions.

Product Information

Transource eSKU1054127417
ManufacturerTripp Lite by Eaton
Manufacturer Part NumberSMART1000RM2UL
Manufacturer Website Addresshttp://www.tripplite.com
Brand NameTripp Lite
Product LineSmartPro
Product ModelSMART1000RM2UL
Product NameSmartPro SMART1000RM2UL 1kVA Rack/Tower UPS
Product TypeLine-interactive UPS

Product Specifications

Technical Information
AVRYes
Plug/Connector TypeNEMA 5-15P
Receptacle TypeNEMA 5-15R
Receptacle Detail6 x NEMA 5-15R
Transfer Time4 ms
Application/UsageServer
Application/UsageNetwork
Application/UsageTelecommunication
Power Description
Load Capacity1000 VA/800 W
Input Voltage120 V AC
Input Voltage Range83 V AC - 147 V AC
Output Voltage120 V AC
Waveform TypePure Sine Wave
Battery Information
Battery ChemistryLithium Iron Phosphate (LiFePO4)
Backup/Run Time (Full Load)8.30 Minute
Backup/Run Time (Half Load)20 Minute
Typical Battery Recharge Time2.70 Hour
Physical Characteristics
Height3.5"
Width17.4"
Depth12.5"
Rack Height2U
Form FactorRack/Tower
Weight (Approximate)16.30 lb
Miscellaneous
Package Contents
  • SmartPro SMART1000RM2UL 1kVA Rack/Tower UPS
  • USB Cable
  • DB9 Cable
  • EPO Cable
  • Rack-Mounting Hardware
  • Owner's Manual
Environmentally FriendlyYes
Environmental CertificationRoHS
Country of OriginChina
Warranty
Limited Warranty5 Year
Categories