Filters
Close

Tripp Lite 24-Fiber MTP MPO OM4 Base-8 MMF Trunk Cable 40/100GbE 3X, 45M

Tripp Lite 24-Fiber MTP MPO OM4 Base-8 MMF Trunk Cable 40/100GbE 3X, 45M - Fiber Optic for Network Device - 12.50 GB/s - 147.64 ft - 3 x MTP/MPO Female Network - 3 x MTP/MPO Female Network - 50/125 µm - Magenta
SKU: 1000233596
Manufacturer part number: N858-45M-3X8-MG
Free shipping
Manufacturer: Tripp Lite
Call for pricing
Picture of Tripp Lite 24-Fiber MTP MPO OM4 Base-8 MMF Trunk Cable 40/100GbE 3X, 45M
The 45-meter (147-foot) N858-45M-3X8-MG MTP/MPO Multimode Base-8 Trunk Cable supports 40/100 Gb Ethernet speeds and is designed for high-density connections between network equipment in telecommunication rooms and data centers.With three female MTP/MPO connectors on each end, this OM4-rated multimode fiber optic cable is recommended for high-density fiber patching between data center MDFs (main distribution frames) and IDFs (intermediate distribution frames). It's colored magenta for instant identification as an OM4 cable. Push/pull tab connectors are easily accessible in high-density data center applications and make the cable easy to install and remove with one hand.The 8-fiber MTP/MPO connectors are about the same size as SC connectors, but are 12 times denser, freeing up rack space for other cables. Optimized for QSFP+ 40GBASE-SR4 and QSFP28 100GBASE-SR4 networks, this cable is tested for low insertion loss and back reflection on every connector and attenuation loss that meets or exceeds current standards. The 5.6-millimeter ruggedized plenum-rated jacket and bend-insensitive fiber are perfect for connecting high-speed network components in ceilings, walls and ducts.

Features

OM4-Rated for 40/100 Gb Ethernet Applications

  • Designed to extend high-density connections between network equipment in telecom rooms and data centers
  • Recommended for patching between data center MDFs and IDFs
  • Optimized for QSFP+ 40GBASE-SR4 and QSFP28 100GBASE-SR4 networks
  • Magenta-colored for identification as an OM4 cable

MTP/MPO Connectors with Push/Pull Tabs

  • 8-fiber female connectors 12 times denser than SC connectors
  • Push/pull tab connectors easy to install and remove with one hand
  • 100% tested for low insertion loss and back reflection

Error-Free Signal Transfer

  • 50/125 duplex glass fiber construction
  • Plenum-rated jacket and bend-insensitive fiber perfect for ceilings, walls and ducts

Product Information

Transource eSKU1036806277
ManufacturerTripp Lite by Eaton
Manufacturer Part NumberN858-45M-3X8-MG
Manufacturer Website Addresshttp://www.tripplite.com
Brand NameTripp Lite
Product ModelN858-45M-3X8-MG
Product NameN858-45M-3X8-MG MTP/MPO Multimode Base-8 Trunk Cable, Magenta, 45 m
Product TypeNetwork Cable

Product Specifications

Technical Information
Cable TypeFiber Optic
Fiber Optic ModeMulti-mode
Core/Cladding Diameter50/125 µm
Cable Length147.60 ft
Connector on First End3 x MTP/MPO Female Network
Connector on Second End3 x MTP/MPO Female Network
Device SupportedNetwork Device
Data Transfer Rate100 Gbit/s
Physical Characteristics
ColorMagenta
Miscellaneous
Environmentally FriendlyYes
Environmental CertificationRoHS
Country of OriginChina
Warranty
Limited WarrantyLifetime
The 45-meter (147-foot) N858-45M-3X8-MG MTP/MPO Multimode Base-8 Trunk Cable supports 40/100 Gb Ethernet speeds and is designed for high-density connections between network equipment in telecommunication rooms and data centers.With three female MTP/MPO connectors on each end, this OM4-rated multimode fiber optic cable is recommended for high-density fiber patching between data center MDFs (main distribution frames) and IDFs (intermediate distribution frames). It's colored magenta for instant identification as an OM4 cable. Push/pull tab connectors are easily accessible in high-density data center applications and make the cable easy to install and remove with one hand.The 8-fiber MTP/MPO connectors are about the same size as SC connectors, but are 12 times denser, freeing up rack space for other cables. Optimized for QSFP+ 40GBASE-SR4 and QSFP28 100GBASE-SR4 networks, this cable is tested for low insertion loss and back reflection on every connector and attenuation loss that meets or exceeds current standards. The 5.6-millimeter ruggedized plenum-rated jacket and bend-insensitive fiber are perfect for connecting high-speed network components in ceilings, walls and ducts.

Features

OM4-Rated for 40/100 Gb Ethernet Applications

  • Designed to extend high-density connections between network equipment in telecom rooms and data centers
  • Recommended for patching between data center MDFs and IDFs
  • Optimized for QSFP+ 40GBASE-SR4 and QSFP28 100GBASE-SR4 networks
  • Magenta-colored for identification as an OM4 cable

MTP/MPO Connectors with Push/Pull Tabs

  • 8-fiber female connectors 12 times denser than SC connectors
  • Push/pull tab connectors easy to install and remove with one hand
  • 100% tested for low insertion loss and back reflection

Error-Free Signal Transfer

  • 50/125 duplex glass fiber construction
  • Plenum-rated jacket and bend-insensitive fiber perfect for ceilings, walls and ducts

Product Information

Transource eSKU1036806277
ManufacturerTripp Lite by Eaton
Manufacturer Part NumberN858-45M-3X8-MG
Manufacturer Website Addresshttp://www.tripplite.com
Brand NameTripp Lite
Product ModelN858-45M-3X8-MG
Product NameN858-45M-3X8-MG MTP/MPO Multimode Base-8 Trunk Cable, Magenta, 45 m
Product TypeNetwork Cable

Product Specifications

Technical Information
Cable TypeFiber Optic
Fiber Optic ModeMulti-mode
Core/Cladding Diameter50/125 µm
Cable Length147.60 ft
Connector on First End3 x MTP/MPO Female Network
Connector on Second End3 x MTP/MPO Female Network
Device SupportedNetwork Device
Data Transfer Rate100 Gbit/s
Physical Characteristics
ColorMagenta
Miscellaneous
Environmentally FriendlyYes
Environmental CertificationRoHS
Country of OriginChina
Warranty
Limited WarrantyLifetime
Categories