Filters
Close

Tripp Lite 8-Port VGA + Audio Over Cat5/Cat6 Video Extender Splitter w/EDID 1000'

Tripp Lite 8-Port VGA + Audio Over Cat5/Cat6 Video Extender Splitter w/EDID 1000' - 1 Input Device - 1000 ft Range - 8 x Network (RJ-45) - 1 x VGA In - 1 x VGA Out - 1920 x 1440 - Twisted Pair - Category 6 - Wall Mountable, Rack-mountable, Pole-mountable - TAA Compliant
SKU: 1000196802
Manufacturer part number: B132-008A-2
Free shipping
Manufacturer: Tripp Lite
Old price: $350.00
$220.28
Picture of Tripp Lite 8-Port VGA + Audio Over Cat5/Cat6 Video Extender Splitter w/EDID 1000'
The B132-008A-2 8-Port VGA + Audio over Cat5/Cat6 Extender/Splitter works with a B132-100A or B132-100A-WP-1 remote receiver to split a VGA audio/video signal into nine separate signals-one local and eight remote. It's ideal for digital signs, trade shows and other applications where the video source is located farther than conventional cables allow or that require multiple displays connected to one source.

The B132-008A-2 uses VGA cable(such as Tripp Lite's P504-Series) to connect to the source and displays and Cat5e/6 cable to transmit to the remote receivers. For best results, use 24 AWG solid-wire N022-01K-GY(Cat5e) or N222-01K-GY(Cat6) cable.

When used with Tripp Lite's B132-Series active remote receivers, the B132-008A-2 can extend a 1920 x 1440(60 Hz) signal up to 500 feet and a 1024 x 768(60 Hz) signal up to 1,000 feet. By daisy-chaining up to six units, one audio/video source can transmit to as many as 49 displays-48 remote and one local.

Add up to three B132-110A remote repeaters to each channel to fully extend the signal range or add more displays. You can extend a 1920 x 1440(60 Hz) signal up to 500 feet or a 1024 x 768(60 Hz) signal up to 1,000 feet from the first repeater in the chain to the last receiver.

The B132-008A-2 also delivers high-quality audio and copies EDID information from a connected display to ensure optimal compatibility. Easy to set up with no Software Or Drivers To Install. Mounts To A Wall, Rack Or Pole Using The Included Hardware.

Product Information

Transource eSKU1032844827
ManufacturerTripp Lite by Eaton
Manufacturer Part NumberB132-008A-2
Manufacturer Website Addresshttp://www.tripplite.com
Brand NameTripp Lite
Product ModelB132-008A-2
Product NameB132-008A-2 8-Port VGA + Audio over Cat5/6 Extender Splitter
Product TypeVideo Extender Receiver

Product Specifications

General Information
ManufacturerTripp Lite by Eaton
Manufacturer Part NumberB132-008A-2
Manufacturer Website Addresshttp://www.tripplite.com
Brand NameTripp Lite
Product ModelB132-008A-2
Product NameB132-008A-2 8-Port VGA + Audio over Cat5/6 Extender Splitter
Marketing InformationThe B132-008A-2 8-Port VGA + Audio over Cat5/Cat6 Extender/Splitter works with a B132-100A or B132-100A-WP-1 remote receiver to split a VGA audio/video signal into nine separate signals-one local and eight remote. It's ideal for digital signs, trade shows and other applications where the video source is located farther than conventional cables allow or that require multiple displays connected to one source.

The B132-008A-2 uses VGA cable(such as Tripp Lite's P504-Series) to connect to the source and displays and Cat5e/6 cable to transmit to the remote receivers. For best results, use 24 AWG solid-wire N022-01K-GY(Cat5e) or N222-01K-GY(Cat6) cable.

When used with Tripp Lite's B132-Series active remote receivers, the B132-008A-2 can extend a 1920 x 1440(60 Hz) signal up to 500 feet and a 1024 x 768(60 Hz) signal up to 1,000 feet. By daisy-chaining up to six units, one audio/video source can transmit to as many as 49 displays-48 remote and one local.

Add up to three B132-110A remote repeaters to each channel to fully extend the signal range or add more displays. You can extend a 1920 x 1440(60 Hz) signal up to 500 feet or a 1024 x 768(60 Hz) signal up to 1,000 feet from the first repeater in the chain to the last receiver.

The B132-008A-2 also delivers high-quality audio and copies EDID information from a connected display to ensure optimal compatibility. Easy to set up with no Software Or Drivers To Install. Mounts To A Wall, Rack Or Pole Using The Included Hardware.
Product TypeVideo Extender Receiver
Technical Information
Connectivity TechnologyWired
Number of Input Devices Supported1
Maximum Operating Distance1000 ft
Video
Maximum Video Resolution1920 x 1440
Interfaces/Ports
Network (RJ-45)Yes
VGA InYes
VGA OutYes
Number of Network (RJ-45) Ports8
Number of VGA Inputs1
Number of VGA Outputs1
Media & Performance
Media Type SupportedTwisted Pair
Twisted Pair Cable StandardCategory 6
Physical Characteristics
Product ColorBlack
Receiver Height1.20"
Receiver Width9.30"
Receiver Depth3.90"
Form FactorWall Mountable
Form FactorRack-mountable
Form FactorPole-mountable
Receiver Weight (Approximate)1.50 lb
Miscellaneous
Package Contents
  • B132-008A-2 8-Port VGA + Audio over Cat5/6 Extender Splitter
  • External Power Supply (Input: 100-240V, 50/60 Hz, 0.5A; Output: 5V, 2A)
  • VGA + Audio Daisy-Chain Cable, 1 ft.
  • Mounting Hardware
  • Owner'S Manual
Country of OriginTaiwan
TAA CompliantYes
Warranty
Limited Warranty1 Year
The B132-008A-2 8-Port VGA + Audio over Cat5/Cat6 Extender/Splitter works with a B132-100A or B132-100A-WP-1 remote receiver to split a VGA audio/video signal into nine separate signals-one local and eight remote. It's ideal for digital signs, trade shows and other applications where the video source is located farther than conventional cables allow or that require multiple displays connected to one source.

The B132-008A-2 uses VGA cable(such as Tripp Lite's P504-Series) to connect to the source and displays and Cat5e/6 cable to transmit to the remote receivers. For best results, use 24 AWG solid-wire N022-01K-GY(Cat5e) or N222-01K-GY(Cat6) cable.

When used with Tripp Lite's B132-Series active remote receivers, the B132-008A-2 can extend a 1920 x 1440(60 Hz) signal up to 500 feet and a 1024 x 768(60 Hz) signal up to 1,000 feet. By daisy-chaining up to six units, one audio/video source can transmit to as many as 49 displays-48 remote and one local.

Add up to three B132-110A remote repeaters to each channel to fully extend the signal range or add more displays. You can extend a 1920 x 1440(60 Hz) signal up to 500 feet or a 1024 x 768(60 Hz) signal up to 1,000 feet from the first repeater in the chain to the last receiver.

The B132-008A-2 also delivers high-quality audio and copies EDID information from a connected display to ensure optimal compatibility. Easy to set up with no Software Or Drivers To Install. Mounts To A Wall, Rack Or Pole Using The Included Hardware.

Product Information

Transource eSKU1032844827
ManufacturerTripp Lite by Eaton
Manufacturer Part NumberB132-008A-2
Manufacturer Website Addresshttp://www.tripplite.com
Brand NameTripp Lite
Product ModelB132-008A-2
Product NameB132-008A-2 8-Port VGA + Audio over Cat5/6 Extender Splitter
Product TypeVideo Extender Receiver

Product Specifications

General Information
ManufacturerTripp Lite by Eaton
Manufacturer Part NumberB132-008A-2
Manufacturer Website Addresshttp://www.tripplite.com
Brand NameTripp Lite
Product ModelB132-008A-2
Product NameB132-008A-2 8-Port VGA + Audio over Cat5/6 Extender Splitter
Marketing InformationThe B132-008A-2 8-Port VGA + Audio over Cat5/Cat6 Extender/Splitter works with a B132-100A or B132-100A-WP-1 remote receiver to split a VGA audio/video signal into nine separate signals-one local and eight remote. It's ideal for digital signs, trade shows and other applications where the video source is located farther than conventional cables allow or that require multiple displays connected to one source.

The B132-008A-2 uses VGA cable(such as Tripp Lite's P504-Series) to connect to the source and displays and Cat5e/6 cable to transmit to the remote receivers. For best results, use 24 AWG solid-wire N022-01K-GY(Cat5e) or N222-01K-GY(Cat6) cable.

When used with Tripp Lite's B132-Series active remote receivers, the B132-008A-2 can extend a 1920 x 1440(60 Hz) signal up to 500 feet and a 1024 x 768(60 Hz) signal up to 1,000 feet. By daisy-chaining up to six units, one audio/video source can transmit to as many as 49 displays-48 remote and one local.

Add up to three B132-110A remote repeaters to each channel to fully extend the signal range or add more displays. You can extend a 1920 x 1440(60 Hz) signal up to 500 feet or a 1024 x 768(60 Hz) signal up to 1,000 feet from the first repeater in the chain to the last receiver.

The B132-008A-2 also delivers high-quality audio and copies EDID information from a connected display to ensure optimal compatibility. Easy to set up with no Software Or Drivers To Install. Mounts To A Wall, Rack Or Pole Using The Included Hardware.
Product TypeVideo Extender Receiver
Technical Information
Connectivity TechnologyWired
Number of Input Devices Supported1
Maximum Operating Distance1000 ft
Video
Maximum Video Resolution1920 x 1440
Interfaces/Ports
Network (RJ-45)Yes
VGA InYes
VGA OutYes
Number of Network (RJ-45) Ports8
Number of VGA Inputs1
Number of VGA Outputs1
Media & Performance
Media Type SupportedTwisted Pair
Twisted Pair Cable StandardCategory 6
Physical Characteristics
Product ColorBlack
Receiver Height1.20"
Receiver Width9.30"
Receiver Depth3.90"
Form FactorWall Mountable
Form FactorRack-mountable
Form FactorPole-mountable
Receiver Weight (Approximate)1.50 lb
Miscellaneous
Package Contents
  • B132-008A-2 8-Port VGA + Audio over Cat5/6 Extender Splitter
  • External Power Supply (Input: 100-240V, 50/60 Hz, 0.5A; Output: 5V, 2A)
  • VGA + Audio Daisy-Chain Cable, 1 ft.
  • Mounting Hardware
  • Owner'S Manual
Country of OriginTaiwan
TAA CompliantYes
Warranty
Limited Warranty1 Year
Categories