Filters
Close

Tripp Lite HDMI Over Cat6 Receiver 4K60Hz HDR 4:4:4 PoC HDCP 2.2 230ft TAA

Tripp Lite HDMI Over Cat6 Receiver 4K60Hz HDR 4:4:4 PoC HDCP 2.2 230ft TAA - 1 Output Device - 230 ft Range - 1 x Network (RJ-45) - 1 x HDMI Out - 4K UHD - 3840 x 2160 - Twisted Pair - Category 6 - Rack-mountable - TAA Compliant
SKU: 1000282616
Manufacturer part number: B127A-1A0-BH
Free shipping
Manufacturer: Tripp Lite
Old price: $125.00
$78.67
Picture of Tripp Lite HDMI Over Cat6 Receiver 4K60Hz HDR 4:4:4 PoC HDCP 2.2 230ft TAA

Features | HDMI Extender Receiver Ideal for Digital Signage in Schools and Workplaces
This 4K receiver is recommended for video presentations in conference rooms, schools, trade shows, meeting facilities, houses of worship, retail settings, hotels and other digital signage applications where the source and display are farther apart than conventional A/V cables allow.

Extends a 4K A/V Transmission up to 230 ft....or Even Farther
The B127A-1A0-BH connects to a Tripp Lite B127A-Series transmitter, switch or splitter to extend 4K signals from an HDMI source to an HDMI display up to 230 feet (70.1 meters) away via user-supplied Cat6 cabling. By adding a Tripp Lite B127A-010-H signal repeater (sold separately) to the application, you can extend the signal up to 400 feet (121.9 meters).

Supports Crystal-Clear 4K Video with Multi-Channel Audio, HDR and 4:4:4 Color
The B127A-1A0-BH supports Ultra HD resolutions up to 3840 x 2160 (4K x 2K) at 60 Hz with 7.1-channel surround sound audio via TOSLINK. High Dynamic Range (HDR) provides a wide range of vibrant colors with richer contrast, brighter whites and deeper blacks that pop on your 4K display. HDCP 2.2 compliance allows you to stream 4K Amazon and Netflix content with no complications. This receiver also supports 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor. Built-in equalization allows you to fine-tune the image quality at the remote display.

Built-In PoC Technology Provides Receiver Power to Avoid Bulky External Power Bricks
Power over Cable (PoC) technology powers the B127A-1A0-BH over Cat6 cable. LEDs indicate when the system is receiving power and a signal is being transmitted. PoC lets you avoid the hassle of a bulky power brick and gives you the freedom to place the receiver where needed without worrying about finding a nearby AC outlet.

Plug-and-Play Operation for Quick Setup and Immediate Use
The receiver works right out of the package with no software required. Mounting hardware is included for installing it on a wall, pole or 19-inch rack. Connect the receiver to a transmitter, switch or splitter with user-supplied Cat6 cable (such as Tripp Lite's N202-Series). Connect to a 4K display with a user-supplied HDMI cable (such as Tripp Lite's P568- or P569-Series).

TAA-Compliant for GSA Schedule Purchases
The B127A-1A0-BH is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

Typical Applications

  • Extend video signals from one room to another using Cat6 cable, which can pass through conduit to meet building codes
  • Gain flexibility in where the receiver is placed, with the freedom to move and relocate it away from an AC outlet
  • Improve the line of sight for digital signage in a hotel, restaurant, theater, house of worship, trade show or other location

System Requirements

  • Source device with HDMI output (Blu-ray player, cable box, laptop)
  • Display device with HDMI input (HDTV, projector, monitor)
  • Tripp Lite B127A-Series transmitter, switch or splitter

Product Information

Transource eSKU1069381326
ManufacturerTripp Lite by Eaton
Manufacturer Part NumberB127A-1A0-BH
Manufacturer Website Addresshttp://www.tripplite.com
Brand NameTripp Lite
Product ModelB127A-1A0-BH
Product NameB127A-1A0-BH 1-Port HDMI over Cat6 Receiver
Product TypeVideo Extender Receiver

Specifications

Technical Information
Connectivity TechnologyWired
Number of Output Devices Supported1
Maximum Operating Distance230 ft
Video
Graphics Modes4K UHD
Maximum Video Resolution3840 x 2160
Interfaces/Ports
Network (RJ-45)Yes
HDMI OutYes
Number of Network (RJ-45) Ports1
Number of HDMI Outputs1
Media & Performance
Media Type SupportedTwisted Pair
Twisted Pair Cable StandardCategory 6
Physical Characteristics
Product ColorBlack
Receiver Height1.06"
Receiver Width4.53"
Receiver Depth2.46"
Form FactorRack-mountable
Receiver Weight (Approximate)1 lb
Miscellaneous
Package Contents
  • B127A-1A0-BH 1-Port HDMI over Cat6 Receiver
  • Mounting Hardware
  • Owner's Manual
Environmentally FriendlyYes
Environmental CertificationRoHS
Environmental CertificationREACH
Country of OriginTaiwan
TAA CompliantYes
Warranty
Limited Warranty1 Year

Features | HDMI Extender Receiver Ideal for Digital Signage in Schools and Workplaces
This 4K receiver is recommended for video presentations in conference rooms, schools, trade shows, meeting facilities, houses of worship, retail settings, hotels and other digital signage applications where the source and display are farther apart than conventional A/V cables allow.

Extends a 4K A/V Transmission up to 230 ft....or Even Farther
The B127A-1A0-BH connects to a Tripp Lite B127A-Series transmitter, switch or splitter to extend 4K signals from an HDMI source to an HDMI display up to 230 feet (70.1 meters) away via user-supplied Cat6 cabling. By adding a Tripp Lite B127A-010-H signal repeater (sold separately) to the application, you can extend the signal up to 400 feet (121.9 meters).

Supports Crystal-Clear 4K Video with Multi-Channel Audio, HDR and 4:4:4 Color
The B127A-1A0-BH supports Ultra HD resolutions up to 3840 x 2160 (4K x 2K) at 60 Hz with 7.1-channel surround sound audio via TOSLINK. High Dynamic Range (HDR) provides a wide range of vibrant colors with richer contrast, brighter whites and deeper blacks that pop on your 4K display. HDCP 2.2 compliance allows you to stream 4K Amazon and Netflix content with no complications. This receiver also supports 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor. Built-in equalization allows you to fine-tune the image quality at the remote display.

Built-In PoC Technology Provides Receiver Power to Avoid Bulky External Power Bricks
Power over Cable (PoC) technology powers the B127A-1A0-BH over Cat6 cable. LEDs indicate when the system is receiving power and a signal is being transmitted. PoC lets you avoid the hassle of a bulky power brick and gives you the freedom to place the receiver where needed without worrying about finding a nearby AC outlet.

Plug-and-Play Operation for Quick Setup and Immediate Use
The receiver works right out of the package with no software required. Mounting hardware is included for installing it on a wall, pole or 19-inch rack. Connect the receiver to a transmitter, switch or splitter with user-supplied Cat6 cable (such as Tripp Lite's N202-Series). Connect to a 4K display with a user-supplied HDMI cable (such as Tripp Lite's P568- or P569-Series).

TAA-Compliant for GSA Schedule Purchases
The B127A-1A0-BH is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

Typical Applications

  • Extend video signals from one room to another using Cat6 cable, which can pass through conduit to meet building codes
  • Gain flexibility in where the receiver is placed, with the freedom to move and relocate it away from an AC outlet
  • Improve the line of sight for digital signage in a hotel, restaurant, theater, house of worship, trade show or other location

System Requirements

  • Source device with HDMI output (Blu-ray player, cable box, laptop)
  • Display device with HDMI input (HDTV, projector, monitor)
  • Tripp Lite B127A-Series transmitter, switch or splitter

Product Information

Transource eSKU1069381326
ManufacturerTripp Lite by Eaton
Manufacturer Part NumberB127A-1A0-BH
Manufacturer Website Addresshttp://www.tripplite.com
Brand NameTripp Lite
Product ModelB127A-1A0-BH
Product NameB127A-1A0-BH 1-Port HDMI over Cat6 Receiver
Product TypeVideo Extender Receiver

Specifications

Technical Information
Connectivity TechnologyWired
Number of Output Devices Supported1
Maximum Operating Distance230 ft
Video
Graphics Modes4K UHD
Maximum Video Resolution3840 x 2160
Interfaces/Ports
Network (RJ-45)Yes
HDMI OutYes
Number of Network (RJ-45) Ports1
Number of HDMI Outputs1
Media & Performance
Media Type SupportedTwisted Pair
Twisted Pair Cable StandardCategory 6
Physical Characteristics
Product ColorBlack
Receiver Height1.06"
Receiver Width4.53"
Receiver Depth2.46"
Form FactorRack-mountable
Receiver Weight (Approximate)1 lb
Miscellaneous
Package Contents
  • B127A-1A0-BH 1-Port HDMI over Cat6 Receiver
  • Mounting Hardware
  • Owner's Manual
Environmentally FriendlyYes
Environmental CertificationRoHS
Environmental CertificationREACH
Country of OriginTaiwan
TAA CompliantYes
Warranty
Limited Warranty1 Year
Categories