Filters
Close

Tripp Lite Medical Ethernet Isolator - RJ45, Network Isolator For Patient Care Vicinity, Cat6 Coupler IEC 60601-1

Tripp Lite Medical Ethernet Isolator - RJ45, Network Isolator For Patient Care Vicinity, Cat6 Coupler IEC 60601-1 - Gray- Cat6 Isolator
SKU: 1000182905
Manufacturer part number: N234-MI-1005
Free shipping
Manufacturer: Tripp Lite
Old price: $552.28
$201.60
Picture of Tripp Lite Medical Ethernet Isolator - RJ45, Network Isolator For Patient Care Vicinity, Cat6 Coupler IEC 60601-1

Features

Isolate Medical Equipment on an Ethernet Network to Enhance Patient Safety

Tripp Lite's N234-MI-1005 medical Ethernet isolator protects staff, patients and medical technology equipment in patient care vicinities from dangerous leakage currents that can travel through a copper-based Ethernet network. It effectively isolates medical equipment to protect patients, yet allows data to flow at Gigabit Ethernet speeds.

Comply with IEC 60601-1 for Use in the Patient Care Vicinity

The N234-MI-1005 complies with IEC 60601-1 and EMC/IEC 60601-1-2 safety standards for a network connection between a medical device and an Ethernet network or non-medical device (PC or laptop). Because it meets IEC 60601-1 standards, this medical network isolator can be used in patient care vicinities. For example, you can use this 60601-1 network isolator in the connection between a clinic's network and the PC of a prolonged EEG system. (Note: You can only connect network components that comply with IEEE 802.3 or IEEE 802.3ab. You cannot connect telecommunication appliances, voltage supplies or similar devices.)

Install In-Line on an Ethernet Network

This Ethernet network isolator has two RJ45 ports and acts as a coupler, joining two tested and approved Cat6 cables to complete the connection between compatible medical equipment and a computer or data network. Because the cables are removable, you can replace a failed cable without replacing the isolator. Completely plug and play, this RJ45 isolator does not require software, drivers or a power supply.

Comply with TAA Requirements

The N234-MI-1005 complies with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.

One-Year Warranty

The N234-MI-1005 is backed by a one-year warranty, ensuring reliability and performance.

Typical Applications

  • Isolate medical equipment connected to an Ethernet network to protect patients in patient care vicinities
  • Connect an EMG measuring station with an analysis computer in a doctor's consulting room
  • Connect the PC of a prolonged EEG system to a clinic's network

System Requirements

  • Network components that comply with IEEE 802.3 or IEEE 802.3ab (10/100/1000BASE-T, twisted-pair)
  • Cat6 network cable

Package Includes

  • N234-MI-1005 Medical Ethernet Isolator - For Patient Care Vicinity
  • Owner's manual

Product Information

Transource eSKU1045118582
ManufacturerTripp Lite by Eaton
Manufacturer Part NumberN234-MI-1005
Manufacturer Website Addresshttp://www.tripplite.com
Brand NameTripp Lite
Product ModelN234-MI-1005
Product NameMedical Ethernet Isolator - RJ45, For Patient Care Vicinity, IEC 60601-1
Product TypeMedical Ethernet Isolator

Product Specifications

General Information
ManufacturerTripp Lite by Eaton
Manufacturer Part NumberN234-MI-1005
Manufacturer Website Addresshttp://www.tripplite.com
Brand NameTripp Lite
Product ModelN234-MI-1005
Product NameMedical Ethernet Isolator - RJ45, For Patient Care Vicinity, IEC 60601-1
Marketing Information

Features

Isolate Medical Equipment on an Ethernet Network to Enhance Patient Safety

Tripp Lite's N234-MI-1005 medical Ethernet isolator protects staff, patients and medical technology equipment in patient care vicinities from dangerous leakage currents that can travel through a copper-based Ethernet network. It effectively isolates medical equipment to protect patients, yet allows data to flow at Gigabit Ethernet speeds.

Comply with IEC 60601-1 for Use in the Patient Care Vicinity

The N234-MI-1005 complies with IEC 60601-1 and EMC/IEC 60601-1-2 safety standards for a network connection between a medical device and an Ethernet network or non-medical device (PC or laptop). Because it meets IEC 60601-1 standards, this medical network isolator can be used in patient care vicinities. For example, you can use this 60601-1 network isolator in the connection between a clinic's network and the PC of a prolonged EEG system. (Note: You can only connect network components that comply with IEEE 802.3 or IEEE 802.3ab. You cannot connect telecommunication appliances, voltage supplies or similar devices.)

Install In-Line on an Ethernet Network

This Ethernet network isolator has two RJ45 ports and acts as a coupler, joining two tested and approved Cat6 cables to complete the connection between compatible medical equipment and a computer or data network. Because the cables are removable, you can replace a failed cable without replacing the isolator. Completely plug and play, this RJ45 isolator does not require software, drivers or a power supply.

Comply with TAA Requirements

The N234-MI-1005 complies with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.

One-Year Warranty

The N234-MI-1005 is backed by a one-year warranty, ensuring reliability and performance.

Typical Applications

  • Isolate medical equipment connected to an Ethernet network to protect patients in patient care vicinities
  • Connect an EMG measuring station with an analysis computer in a doctor's consulting room
  • Connect the PC of a prolonged EEG system to a clinic's network

System Requirements

  • Network components that comply with IEEE 802.3 or IEEE 802.3ab (10/100/1000BASE-T, twisted-pair)
  • Cat6 network cable

Package Includes

  • N234-MI-1005 Medical Ethernet Isolator - For Patient Care Vicinity
  • Owner's manual
Product TypeMedical Ethernet Isolator
Physical Characteristics
Product ColorGray
Weight (Approximate)1.76 oz
Miscellaneous
Package Contents
  • Medical Ethernet Isolator - RJ45, For Patient Care Vicinity, IEC 60601-1
  • Owner's manual
Application/UsageNetwork
Environmentally FriendlyYes
Environmental CertificationRoHS
Environmental CertificationREACH
Country of OriginChina
TAA CompliantYes
Warranty
Limited Warranty1 Year

Features

Isolate Medical Equipment on an Ethernet Network to Enhance Patient Safety

Tripp Lite's N234-MI-1005 medical Ethernet isolator protects staff, patients and medical technology equipment in patient care vicinities from dangerous leakage currents that can travel through a copper-based Ethernet network. It effectively isolates medical equipment to protect patients, yet allows data to flow at Gigabit Ethernet speeds.

Comply with IEC 60601-1 for Use in the Patient Care Vicinity

The N234-MI-1005 complies with IEC 60601-1 and EMC/IEC 60601-1-2 safety standards for a network connection between a medical device and an Ethernet network or non-medical device (PC or laptop). Because it meets IEC 60601-1 standards, this medical network isolator can be used in patient care vicinities. For example, you can use this 60601-1 network isolator in the connection between a clinic's network and the PC of a prolonged EEG system. (Note: You can only connect network components that comply with IEEE 802.3 or IEEE 802.3ab. You cannot connect telecommunication appliances, voltage supplies or similar devices.)

Install In-Line on an Ethernet Network

This Ethernet network isolator has two RJ45 ports and acts as a coupler, joining two tested and approved Cat6 cables to complete the connection between compatible medical equipment and a computer or data network. Because the cables are removable, you can replace a failed cable without replacing the isolator. Completely plug and play, this RJ45 isolator does not require software, drivers or a power supply.

Comply with TAA Requirements

The N234-MI-1005 complies with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.

One-Year Warranty

The N234-MI-1005 is backed by a one-year warranty, ensuring reliability and performance.

Typical Applications

  • Isolate medical equipment connected to an Ethernet network to protect patients in patient care vicinities
  • Connect an EMG measuring station with an analysis computer in a doctor's consulting room
  • Connect the PC of a prolonged EEG system to a clinic's network

System Requirements

  • Network components that comply with IEEE 802.3 or IEEE 802.3ab (10/100/1000BASE-T, twisted-pair)
  • Cat6 network cable

Package Includes

  • N234-MI-1005 Medical Ethernet Isolator - For Patient Care Vicinity
  • Owner's manual

Product Information

Transource eSKU1045118582
ManufacturerTripp Lite by Eaton
Manufacturer Part NumberN234-MI-1005
Manufacturer Website Addresshttp://www.tripplite.com
Brand NameTripp Lite
Product ModelN234-MI-1005
Product NameMedical Ethernet Isolator - RJ45, For Patient Care Vicinity, IEC 60601-1
Product TypeMedical Ethernet Isolator

Product Specifications

General Information
ManufacturerTripp Lite by Eaton
Manufacturer Part NumberN234-MI-1005
Manufacturer Website Addresshttp://www.tripplite.com
Brand NameTripp Lite
Product ModelN234-MI-1005
Product NameMedical Ethernet Isolator - RJ45, For Patient Care Vicinity, IEC 60601-1
Marketing Information

Features

Isolate Medical Equipment on an Ethernet Network to Enhance Patient Safety

Tripp Lite's N234-MI-1005 medical Ethernet isolator protects staff, patients and medical technology equipment in patient care vicinities from dangerous leakage currents that can travel through a copper-based Ethernet network. It effectively isolates medical equipment to protect patients, yet allows data to flow at Gigabit Ethernet speeds.

Comply with IEC 60601-1 for Use in the Patient Care Vicinity

The N234-MI-1005 complies with IEC 60601-1 and EMC/IEC 60601-1-2 safety standards for a network connection between a medical device and an Ethernet network or non-medical device (PC or laptop). Because it meets IEC 60601-1 standards, this medical network isolator can be used in patient care vicinities. For example, you can use this 60601-1 network isolator in the connection between a clinic's network and the PC of a prolonged EEG system. (Note: You can only connect network components that comply with IEEE 802.3 or IEEE 802.3ab. You cannot connect telecommunication appliances, voltage supplies or similar devices.)

Install In-Line on an Ethernet Network

This Ethernet network isolator has two RJ45 ports and acts as a coupler, joining two tested and approved Cat6 cables to complete the connection between compatible medical equipment and a computer or data network. Because the cables are removable, you can replace a failed cable without replacing the isolator. Completely plug and play, this RJ45 isolator does not require software, drivers or a power supply.

Comply with TAA Requirements

The N234-MI-1005 complies with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.

One-Year Warranty

The N234-MI-1005 is backed by a one-year warranty, ensuring reliability and performance.

Typical Applications

  • Isolate medical equipment connected to an Ethernet network to protect patients in patient care vicinities
  • Connect an EMG measuring station with an analysis computer in a doctor's consulting room
  • Connect the PC of a prolonged EEG system to a clinic's network

System Requirements

  • Network components that comply with IEEE 802.3 or IEEE 802.3ab (10/100/1000BASE-T, twisted-pair)
  • Cat6 network cable

Package Includes

  • N234-MI-1005 Medical Ethernet Isolator - For Patient Care Vicinity
  • Owner's manual
Product TypeMedical Ethernet Isolator
Physical Characteristics
Product ColorGray
Weight (Approximate)1.76 oz
Miscellaneous
Package Contents
  • Medical Ethernet Isolator - RJ45, For Patient Care Vicinity, IEC 60601-1
  • Owner's manual
Application/UsageNetwork
Environmentally FriendlyYes
Environmental CertificationRoHS
Environmental CertificationREACH
Country of OriginChina
TAA CompliantYes
Warranty
Limited Warranty1 Year
Categories