Filters
Close

Tripp Lite PDU ATS / Metered 120V 1.92kW 20A 16 5-15/20R Dual L5-20P 1URM

Tripp Lite PDU ATS / Metered 120V 1.92kW 20A 16 5-15/20R Dual L5-20P 1URM - Metered Auto Transfer Switch - NEMA 5-20P, NEMA L5-20P - 16 x NEMA 5-15/20R - 120 V AC - 1U - Horizontal - Rack-mountable, Wall-mountable - TAA Compliant
SKU: 1000264452
Manufacturer part number: PDUMH20ATS
Free shipping
Manufacturer: Tripp Lite
Old price: $741.32
$466.58
Picture of Tripp Lite PDU ATS / Metered 120V 1.92kW 20A 16 5-15/20R Dual L5-20P 1URM

Single-Phase 20A ATS PDU Distributes and Monitors Network-Grade Power in Real Time
This metered PDU provides real-time local reporting of the total load level via its built-in digital current metering. Ideal for network IT applications, small computer rooms and other equipment rack applications, the PDUMH20ATS features 16 NEMA 5-15/20R 120V outlets for connecting equipment. Dual 12-foot (3.7-meter) power cords with NEMA L5-20P inputs (two 5-20P adapters are included) connect to separate primary and secondary mains circuits, backup generators, UPS systems or utility power grids, including out-of-phase sources.

Switches from Primary to Secondary Power Source in Milliseconds
Automatic transfer switching (ATS) allows the PDU to switch to the secondary source within 2-7 milliseconds, should the primary source fail or become unstable, to ensure your connected equipment operates without interruption. An on-board ATS processor constantly evaluates the power quality of both input sources. It prevents switching if the secondary source is unavailable or of lower quality than the primary source.

Digital Load Meter Helps Prevent Potentially Expensive Overloads
A digital ammeter reports the total load for all connected equipment. Monitoring amperage helps ensure load levels remain well below maximum capacity with no danger of overload that could lead to costly downtime or damaged equipment. Maintaining proper load levels, even while adding new equipment, can keep your TCO (total cost of ownership) low.

Mounts into 1U of Rack Space or on a Wall
Use the included mounting hardware to install the all-metal housing into 1U of space in an EIA-standard 19-inch rack. You may also use the mounting brackets to secure the PDU to a wall or under a counter.

TAA-Compliant for GSA Schedule Purchases
The PDUMH20ATS is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

Product Information

Transource eSKU1069412361
ManufacturerTripp Lite by Eaton
Manufacturer Part NumberPDUMH20ATS
Manufacturer Website Addresshttp://www.tripplite.com
Brand NameTripp Lite
Product Name16-Outlets PDU
Product TypePDU

Specifications

Technical Information
PDU TypeMetered Auto Transfer Switch
PhaseSingle Phase
Plug/Connector TypeNEMA 5-20P
Plug/Connector TypeNEMA L5-20P
Plug/Connector Detail2 x NEMA L5-20P
Plug/Connector Detail2 x NEMA 5-20P
Receptacle TypeNEMA 5-15/20R
Receptacle Detail16 x NEMA 5-15/20R
Protection TypeCircuit Protection
Power Description
Input Voltage120 V AC
Output Voltage100 V AC
Output Voltage120 V AC
Output Voltage127 V AC
Power Rating (Watt)2030 W
Input Current20 A
Physical Characteristics
Mounting OrientationHorizontal
Mount TypeRack-mountable
Mount TypeWall-mountable
Rack Height1U
Height1.8"
Width17.5"
Depth14.5"
Weight (Approximate)12.20 lb
Miscellaneous
Package Contents
  • 16-Outlets PDU
  • Detachable C19 To NEMA L5-20P Secondary Input Cord, 12 Ft. (3.7 m)
  • 2 x L5-20R To 5-20P Plug Adapters
  • Cable Retention Kit
  • Rack-Mounting Hardware
  • Owner's Manual
Environmentally FriendlyYes
Environmental CertificationRoHS
Country of OriginTaiwan
TAA CompliantYes
Warranty
Limited Warranty2 Year

Single-Phase 20A ATS PDU Distributes and Monitors Network-Grade Power in Real Time
This metered PDU provides real-time local reporting of the total load level via its built-in digital current metering. Ideal for network IT applications, small computer rooms and other equipment rack applications, the PDUMH20ATS features 16 NEMA 5-15/20R 120V outlets for connecting equipment. Dual 12-foot (3.7-meter) power cords with NEMA L5-20P inputs (two 5-20P adapters are included) connect to separate primary and secondary mains circuits, backup generators, UPS systems or utility power grids, including out-of-phase sources.

Switches from Primary to Secondary Power Source in Milliseconds
Automatic transfer switching (ATS) allows the PDU to switch to the secondary source within 2-7 milliseconds, should the primary source fail or become unstable, to ensure your connected equipment operates without interruption. An on-board ATS processor constantly evaluates the power quality of both input sources. It prevents switching if the secondary source is unavailable or of lower quality than the primary source.

Digital Load Meter Helps Prevent Potentially Expensive Overloads
A digital ammeter reports the total load for all connected equipment. Monitoring amperage helps ensure load levels remain well below maximum capacity with no danger of overload that could lead to costly downtime or damaged equipment. Maintaining proper load levels, even while adding new equipment, can keep your TCO (total cost of ownership) low.

Mounts into 1U of Rack Space or on a Wall
Use the included mounting hardware to install the all-metal housing into 1U of space in an EIA-standard 19-inch rack. You may also use the mounting brackets to secure the PDU to a wall or under a counter.

TAA-Compliant for GSA Schedule Purchases
The PDUMH20ATS is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

Product Information

Transource eSKU1069412361
ManufacturerTripp Lite by Eaton
Manufacturer Part NumberPDUMH20ATS
Manufacturer Website Addresshttp://www.tripplite.com
Brand NameTripp Lite
Product Name16-Outlets PDU
Product TypePDU

Specifications

Technical Information
PDU TypeMetered Auto Transfer Switch
PhaseSingle Phase
Plug/Connector TypeNEMA 5-20P
Plug/Connector TypeNEMA L5-20P
Plug/Connector Detail2 x NEMA L5-20P
Plug/Connector Detail2 x NEMA 5-20P
Receptacle TypeNEMA 5-15/20R
Receptacle Detail16 x NEMA 5-15/20R
Protection TypeCircuit Protection
Power Description
Input Voltage120 V AC
Output Voltage100 V AC
Output Voltage120 V AC
Output Voltage127 V AC
Power Rating (Watt)2030 W
Input Current20 A
Physical Characteristics
Mounting OrientationHorizontal
Mount TypeRack-mountable
Mount TypeWall-mountable
Rack Height1U
Height1.8"
Width17.5"
Depth14.5"
Weight (Approximate)12.20 lb
Miscellaneous
Package Contents
  • 16-Outlets PDU
  • Detachable C19 To NEMA L5-20P Secondary Input Cord, 12 Ft. (3.7 m)
  • 2 x L5-20R To 5-20P Plug Adapters
  • Cable Retention Kit
  • Rack-Mounting Hardware
  • Owner's Manual
Environmentally FriendlyYes
Environmental CertificationRoHS
Country of OriginTaiwan
TAA CompliantYes
Warranty
Limited Warranty2 Year
Categories