Filters
Close

Tripp Lite PDU Switched ATS 208V 30A 16 C13; 2 C19; 1 L6-30R Horizontal 2U TAA

Tripp Lite PDU Switched ATS 208V 30A 16 C13; 2 C19; 1 L6-30R Horizontal 2U TAA - 1 x NEMA L6-30R, 2 x IEC 60320 C19, 16 x IEC 60320 C13 - 208 V AC - 2U - Horizontal Rackmount"
SKU: 1000344742
Manufacturer part number: PDUMH30HVATNET
Free shipping
Manufacturer: Tripp Lite
Old price: $1,872.00
$1,178.20
Picture of Tripp Lite PDU Switched ATS 208V 30A 16 C13; 2 C19; 1 L6-30R Horizontal 2U TAA

Tripp Lite Switched ATS / Auto Transfer Switch provides a redundant power option for single-corded network devices. Dual input cords support separate connection to PRIMARY and SECONDARY power sources. The ATS will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails altogether, the ATS will switch over to the secondary power source until the primary input is restored and stable. Highly reliable solid-state switching between primary and secondary inputs occurs in 1-5 milliseconds. Switched PDU features include individually controllable output receptacles and built-in network interface. Super-fast switchover between primary and secondary power sources occurs within milliseconds. ATS functionality is supported by any two compatible AC power sources, regardless of phase angle, to support a variety of advanced redundant power networking applications. Enables fault tolerant hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system. In a two-UPS environment, the primary input cable must be supported by a full time sine wave UPS with zero transfer time. Tripp Lite SmartOnline series is highly recommended for use as the primary UPS in a two-UPS application. ATS configurations utilizing separate mains circuits, backup generators and even separate utility power grid feeds are fully supported. On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. Front input LED's display primary or secondary power availability. Built-in LX Platform network management interface card. The Java-free LX Platform HTML5-based network interface enables full remote access for PDU status monitoring and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP.

Product Information

Transource eSKU 1000344742
Manufacturer Tripp Lite by Eaton
Manufacturer Part Number PDUMH30HVATNET
Manufacturer Website Address http://www.tripplite.com
Brand Name Tripp Lite
Product Series Switched
Product Model PDUMH30HVATNET
Product Name Switched PDUMH30HVATNET 19-Outlets PDU
Product Type PDU

Technical Specifications

Technical Information

PDU Type Switched
Plug/Connector Type NEMA L6-30P
Plug/Connector Detail 2 x NEMA L6-30P
Receptacle Type NEMA L6-30R
Receptacle Type IEC 60320 C19
Receptacle Type IEC 60320 C13
Receptacle Detail 1 x NEMA L6-30R
Receptacle Detail 2 x IEC 60320 C19
Receptacle Detail 16 x IEC 60320 C13

Power Description

Input Voltage 230 V AC

Management

Management

Protocols:

  • HTTP
  • HTTPS
  • PowerAlert Network Management System
  • SMTP
  • SNMPv1
  • SNMPv2
  • Telnet
  • SSH
  • FTP
  • DHCP
  • BOOTP
  • NTP

Physical Characteristics

Mounting Orientation Horizontal
Mount Type Rack-mountable
Rack Height 2U

Miscellaneous

Environmentally Friendly Yes
Environmental Certification RoHS
Country of Origin Taiwan
TAA Compliant Yes

Warranty

Limited Warranty 2 Year

Tripp Lite Switched ATS / Auto Transfer Switch provides a redundant power option for single-corded network devices. Dual input cords support separate connection to PRIMARY and SECONDARY power sources. The ATS will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails altogether, the ATS will switch over to the secondary power source until the primary input is restored and stable. Highly reliable solid-state switching between primary and secondary inputs occurs in 1-5 milliseconds. Switched PDU features include individually controllable output receptacles and built-in network interface. Super-fast switchover between primary and secondary power sources occurs within milliseconds. ATS functionality is supported by any two compatible AC power sources, regardless of phase angle, to support a variety of advanced redundant power networking applications. Enables fault tolerant hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system. In a two-UPS environment, the primary input cable must be supported by a full time sine wave UPS with zero transfer time. Tripp Lite SmartOnline series is highly recommended for use as the primary UPS in a two-UPS application. ATS configurations utilizing separate mains circuits, backup generators and even separate utility power grid feeds are fully supported. On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. Front input LED's display primary or secondary power availability. Built-in LX Platform network management interface card. The Java-free LX Platform HTML5-based network interface enables full remote access for PDU status monitoring and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP.

Product Information

Transource eSKU 1000344742
Manufacturer Tripp Lite by Eaton
Manufacturer Part Number PDUMH30HVATNET
Manufacturer Website Address http://www.tripplite.com
Brand Name Tripp Lite
Product Series Switched
Product Model PDUMH30HVATNET
Product Name Switched PDUMH30HVATNET 19-Outlets PDU
Product Type PDU

Technical Specifications

Technical Information

PDU Type Switched
Plug/Connector Type NEMA L6-30P
Plug/Connector Detail 2 x NEMA L6-30P
Receptacle Type NEMA L6-30R
Receptacle Type IEC 60320 C19
Receptacle Type IEC 60320 C13
Receptacle Detail 1 x NEMA L6-30R
Receptacle Detail 2 x IEC 60320 C19
Receptacle Detail 16 x IEC 60320 C13

Power Description

Input Voltage 230 V AC

Management

Management

Protocols:

  • HTTP
  • HTTPS
  • PowerAlert Network Management System
  • SMTP
  • SNMPv1
  • SNMPv2
  • Telnet
  • SSH
  • FTP
  • DHCP
  • BOOTP
  • NTP

Physical Characteristics

Mounting Orientation Horizontal
Mount Type Rack-mountable
Rack Height 2U

Miscellaneous

Environmentally Friendly Yes
Environmental Certification RoHS
Country of Origin Taiwan
TAA Compliant Yes

Warranty

Limited Warranty 2 Year
Categories