Filters
Close

Tripp Lite PoE to USB Micro-B and RJ45 Active Splitter 48V to 5V 1A 100M

Tripp Lite PoE to USB Micro-B and RJ45 Active Splitter 48V to 5V 1A 100M - 328 ft Maximum Operating Distance - Network (RJ-45) - USB
SKU: 1000273967
Manufacturer part number: NPOE-SPL-G-5VMU
Free shipping
Manufacturer: Tripp Lite
Old price: $24.16
$15.21
Picture of Tripp Lite PoE to USB Micro-B and RJ45 Active Splitter 48V to 5V 1A 100M

Features

Split Your PoE Signal into Separate Power and Ethernet Connections for Edge Networks
Connect the NPOE-SPL-G-5VMU PoE (Power over Ethernet) splitter to your edge network up to 328 feet (100 meters) from a PoE switch or 48V injector. The splitter separates the power and data signals, delivering 5V 1A (5W) of power to the USB Micro-B plug and 10/100/1000 Mbps to the RJ45 data plug. This allows you more flexibility in placing devices in areas where an AC outlet is unavailable and too expensive or impractical to install.

Supports Power over Ethernet to Save You Money and Give You More Installation Choices
This PoE splitter supplies the power (through its USB connector) to operate non-PoE equipment, such as security cameras, VoIP telephones and wireless access points (WAP). This saves you the expense and effort of purchasing, connecting and installing individual power supplies for each device. It also helps you install devices in areas far away from AC outlets, such as poles or ceilings. The NPOE-SPL-G-5VMU supports a wide range of input voltages from 36VDC to 57VDC and has a fixed USB output of 5VDC.

Simple Plug-and-Play Installation Has the Splitter Connected in Minutes
No configuration or software is required to add the NPOE-SPL-G-5VMU to your LAN. It complies with 802.3af (PoE), 802.3 (Ethernet), 802.3u (Fast Ethernet) and 802.3ab (Gigabit Ethernet) standards.

Typical Applications

  • Install an Alexa-enabled device or VoIP phone in an area without a standard power connection
  • Fill in Wi-Fi dead spots in your office with a wireless access point connected to your LAN
  • Set up digital signage in a mall, arena, office building or theater
  • Connect security cameras and other A/V surveillance equipment in a video wall

System Requirements

  • IEEE 802.3af/at-compliant PoE injector or switch
  • Existing or newly installed Cat5e/6/6a cabling
  • A network device with a 5V 1a USB Micro-B power port

Product Information

Transource eSKU1060206489
ManufacturerTripp Lite by Eaton
Manufacturer Part NumberNPOE-SPL-G-5VMU
Manufacturer Website Addresshttp://www.tripplite.com
Brand NameTripp Lite
Product ModelNPOE-SPL-G-5VMU
Product NameNPOE-SPL-G-5VMU PoE to USB Micro-B and RJ45 Active Splitter
Product TypeSignal Splitter

Specifications

Interfaces/Ports
Network (RJ-45)Yes
USBYes
Number of Network (RJ-45) Ports1
Media & Performance
Maximum Operating Distance328 ft
Power Description
Input Voltage5 V DC
Physical Characteristics
Height0.9"
Width3.2"
Depth1.1"
Weight (Approximate)1.76 oz
Miscellaneous
Package Contents
  • NPOE-SPL-G-5VMU PoE to USB Micro-B and RJ45 Active Splitter
  • Quick Start Guide
Environmentally FriendlyYes
Environmental CertificationRoHS
Environmental CertificationREACH
Country of OriginChina
Warranty
Limited Warranty3 Year

Features

Split Your PoE Signal into Separate Power and Ethernet Connections for Edge Networks
Connect the NPOE-SPL-G-5VMU PoE (Power over Ethernet) splitter to your edge network up to 328 feet (100 meters) from a PoE switch or 48V injector. The splitter separates the power and data signals, delivering 5V 1A (5W) of power to the USB Micro-B plug and 10/100/1000 Mbps to the RJ45 data plug. This allows you more flexibility in placing devices in areas where an AC outlet is unavailable and too expensive or impractical to install.

Supports Power over Ethernet to Save You Money and Give You More Installation Choices
This PoE splitter supplies the power (through its USB connector) to operate non-PoE equipment, such as security cameras, VoIP telephones and wireless access points (WAP). This saves you the expense and effort of purchasing, connecting and installing individual power supplies for each device. It also helps you install devices in areas far away from AC outlets, such as poles or ceilings. The NPOE-SPL-G-5VMU supports a wide range of input voltages from 36VDC to 57VDC and has a fixed USB output of 5VDC.

Simple Plug-and-Play Installation Has the Splitter Connected in Minutes
No configuration or software is required to add the NPOE-SPL-G-5VMU to your LAN. It complies with 802.3af (PoE), 802.3 (Ethernet), 802.3u (Fast Ethernet) and 802.3ab (Gigabit Ethernet) standards.

Typical Applications

  • Install an Alexa-enabled device or VoIP phone in an area without a standard power connection
  • Fill in Wi-Fi dead spots in your office with a wireless access point connected to your LAN
  • Set up digital signage in a mall, arena, office building or theater
  • Connect security cameras and other A/V surveillance equipment in a video wall

System Requirements

  • IEEE 802.3af/at-compliant PoE injector or switch
  • Existing or newly installed Cat5e/6/6a cabling
  • A network device with a 5V 1a USB Micro-B power port

Product Information

Transource eSKU1060206489
ManufacturerTripp Lite by Eaton
Manufacturer Part NumberNPOE-SPL-G-5VMU
Manufacturer Website Addresshttp://www.tripplite.com
Brand NameTripp Lite
Product ModelNPOE-SPL-G-5VMU
Product NameNPOE-SPL-G-5VMU PoE to USB Micro-B and RJ45 Active Splitter
Product TypeSignal Splitter

Specifications

Interfaces/Ports
Network (RJ-45)Yes
USBYes
Number of Network (RJ-45) Ports1
Media & Performance
Maximum Operating Distance328 ft
Power Description
Input Voltage5 V DC
Physical Characteristics
Height0.9"
Width3.2"
Depth1.1"
Weight (Approximate)1.76 oz
Miscellaneous
Package Contents
  • NPOE-SPL-G-5VMU PoE to USB Micro-B and RJ45 Active Splitter
  • Quick Start Guide
Environmentally FriendlyYes
Environmental CertificationRoHS
Environmental CertificationREACH
Country of OriginChina
Warranty
Limited Warranty3 Year
Categories