Filters
Close

Tripp Lite SC Multimode Fiber to Gbe Media Converter POE+ 10/100/1000 550M

Tripp Lite SC Multimode Fiber to Gbe Media Converter POE+ 10/100/1000 550M - 1 x Network (RJ-45) - 1 x SC Ports - DuplexSC Port - Multi-mode - Gigabit Ethernet - 10/100/1000Base-T, 1000Base-X
SKU: 1000257351
Manufacturer part number: N785-P01-SC-MM1
Free shipping
Manufacturer: Tripp Lite
Old price: $198.40
$124.87
Picture of Tripp Lite SC Multimode Fiber to Gbe Media Converter POE+ 10/100/1000 550M

Extends Power and Data to a PoE+ Device up to 550 Meters via SC Multimode Fiber Cable

This economical unit converts a multimode fiber optical signal to a copper Ethernet signal that extends both power (48 VDC) and 10/100/1000 Mbps Gigabit Ethernet to a PoE+ (Power over Ethernet) device. Because Cat5e/6 cables are limited to only 100 meters, it is more effective to couple the N785-P01-SC-MM1 with multimode fiber cable to reach greater distances. This could include providing both data and power to PoE and PoE+ devices, such as security cameras, VoIP telephones, point-of-sale kiosks and access control devices.

Supports Power over Ethernet to Save You Money and Give You More Installation Choices

PoE saves you the expense and effort of purchasing, connecting and installing individual power supplies for each device. It also helps you install PoE devices in areas far away from AC outlets, such as poles or ceilings.

Supports Auto-Sensing of Network Speed and Other Advanced Functions

Monitoring and controlling your network nodes is easy with the N785-P01-SC-MM1's advanced features, such as automatic network speed sensing, full/half-duplex auto-detection and automatic MDI/MDIZ configuration. Six LEDs indicate the converter's power, PoE, Ethernet network and fiber link statuses at a glance. Link fault pass through (LFP) monitors both the SC and RJ45 ports to ensure link status remains active.

Works in Tandem with Tripp Lite's N785-001-SC-MM Media Converter

This media converter connects to the N785-001-SC-MM using multimode fiber optic cabling with SC ends (such as Tripp Lite's N520-Series, sold separately) to extend an Ethernet network connection up to 550 meters. Use Cat5e/6 cabling (such as Tripp Lite's N001- or N201-Series cables) to deliver data and power to a 10/100/1000 Mbps PoE device up to 100 meters (328 feet) from the N785-P01-SC-MM1.

Completely Plug-and-Play with No Additional Software Required for Connection

The compact metal converter is easy to install and set up with no software or drivers required. The included power supply connects to a convenient AC outlet with no computer or other signal source needed.

Product Information

Transource eSKU1059576905
ManufacturerTripp Lite by Eaton
Manufacturer Part NumberN785-P01-SC-MM1
Manufacturer Website Addresshttp://www.tripplite.com
Brand NameTripp Lite
Product ModelN785-P01-SC-MM1
Product NameN785-P01-SC-MM1 Transceiver/Media Converter
Product TypeTransceiver/Media Converter

Product Specifications

Interfaces/Ports
Total Number of Ports2
Network (RJ-45)Yes
Number of Network (RJ-45) Ports1
Number of SC Ports1
SC Port TypeDuplex
Media & Performance
Media Type SupportedTwisted Pair
Media Type SupportedOptical Fiber
Fiber Mode SupportedMulti-mode
Fiber Optic Wavelength850 nm
Maximum Distance Supported1804.46 ft
Network & Communication
Ethernet TechnologyGigabit Ethernet
Network Technology10/100/1000Base-T
Network Technology1000Base-X
Power Description
Power SourcePower Supply
Physical Characteristics
Height1"
Width3.7"
Depth2.8"
Weight (Approximate)7.04 oz
Miscellaneous
Package Contents
  • N785-P01-SC-MM1 Transceiver/Media Converter
  • External Power Supply with 3.6 ft. Cord and NEMA 5-15P Plug (Input: 100-240V, 50/60 Hz, 1.5A; Output: 48V 1.25A)
  • Owner's Manual
Environmentally FriendlyYes
Environmental CertificationRoHS
Country of OriginChina
Warranty
Limited Warranty2 Year

Extends Power and Data to a PoE+ Device up to 550 Meters via SC Multimode Fiber Cable

This economical unit converts a multimode fiber optical signal to a copper Ethernet signal that extends both power (48 VDC) and 10/100/1000 Mbps Gigabit Ethernet to a PoE+ (Power over Ethernet) device. Because Cat5e/6 cables are limited to only 100 meters, it is more effective to couple the N785-P01-SC-MM1 with multimode fiber cable to reach greater distances. This could include providing both data and power to PoE and PoE+ devices, such as security cameras, VoIP telephones, point-of-sale kiosks and access control devices.

Supports Power over Ethernet to Save You Money and Give You More Installation Choices

PoE saves you the expense and effort of purchasing, connecting and installing individual power supplies for each device. It also helps you install PoE devices in areas far away from AC outlets, such as poles or ceilings.

Supports Auto-Sensing of Network Speed and Other Advanced Functions

Monitoring and controlling your network nodes is easy with the N785-P01-SC-MM1's advanced features, such as automatic network speed sensing, full/half-duplex auto-detection and automatic MDI/MDIZ configuration. Six LEDs indicate the converter's power, PoE, Ethernet network and fiber link statuses at a glance. Link fault pass through (LFP) monitors both the SC and RJ45 ports to ensure link status remains active.

Works in Tandem with Tripp Lite's N785-001-SC-MM Media Converter

This media converter connects to the N785-001-SC-MM using multimode fiber optic cabling with SC ends (such as Tripp Lite's N520-Series, sold separately) to extend an Ethernet network connection up to 550 meters. Use Cat5e/6 cabling (such as Tripp Lite's N001- or N201-Series cables) to deliver data and power to a 10/100/1000 Mbps PoE device up to 100 meters (328 feet) from the N785-P01-SC-MM1.

Completely Plug-and-Play with No Additional Software Required for Connection

The compact metal converter is easy to install and set up with no software or drivers required. The included power supply connects to a convenient AC outlet with no computer or other signal source needed.

Product Information

Transource eSKU1059576905
ManufacturerTripp Lite by Eaton
Manufacturer Part NumberN785-P01-SC-MM1
Manufacturer Website Addresshttp://www.tripplite.com
Brand NameTripp Lite
Product ModelN785-P01-SC-MM1
Product NameN785-P01-SC-MM1 Transceiver/Media Converter
Product TypeTransceiver/Media Converter

Product Specifications

Interfaces/Ports
Total Number of Ports2
Network (RJ-45)Yes
Number of Network (RJ-45) Ports1
Number of SC Ports1
SC Port TypeDuplex
Media & Performance
Media Type SupportedTwisted Pair
Media Type SupportedOptical Fiber
Fiber Mode SupportedMulti-mode
Fiber Optic Wavelength850 nm
Maximum Distance Supported1804.46 ft
Network & Communication
Ethernet TechnologyGigabit Ethernet
Network Technology10/100/1000Base-T
Network Technology1000Base-X
Power Description
Power SourcePower Supply
Physical Characteristics
Height1"
Width3.7"
Depth2.8"
Weight (Approximate)7.04 oz
Miscellaneous
Package Contents
  • N785-P01-SC-MM1 Transceiver/Media Converter
  • External Power Supply with 3.6 ft. Cord and NEMA 5-15P Plug (Input: 100-240V, 50/60 Hz, 1.5A; Output: 48V 1.25A)
  • Owner's Manual
Environmentally FriendlyYes
Environmental CertificationRoHS
Country of OriginChina
Warranty
Limited Warranty2 Year
Categories