Filters
Close

Tripp Lite VGA Over IP Receiver / Extender w/ RS-232 Serial & IR Control TAA

Tripp Lite VGA Over IP Receiver / Extender w/ RS-232 Serial & IR Control TAA - 1 Output Device - 328.08 ft Range - 1 x Network (RJ-45) - 1 x VGA Out - 1920 x 1440 - Twisted Pair - Category 6 - Rack-mountable, Wall Mountable, Pole-mountable - TAA Compliant
SKU: 1000260766
Manufacturer part number: B160-100-VSI
Free shipping
Manufacturer: Tripp Lite
Old price: $248.00
$156.08
Picture of Tripp Lite VGA Over IP Receiver / Extender w/ RS-232 Serial & IR Control TAA

The B160-100-VSI VGA Video + Audio with RS-232 Serial and IR Control over IP Receiver extends and distributes VGA video + audio, RS-232 serial and IR (infrared) remote signals through a dedicated Ethernet network switch located up to 328 feet (100 m) away. With an additional 328 feet between the switch and the transmitter (sold separately), the total maximum distance from source to display is 656 feet (200 m).

The B160-100-VSI is designed for managed network switches with IGMP, which allow login and remote management via switch interface. You can connect up to 64 transmitters and 255 receivers in a single managed switch installation.

The B160-100-VSI supports video resolutions up to 1920 x 1440, including 1080p. It works with any analog or digital source, including HDMI and DisplayPort™. It extends IR control signals that control a source, such as a Blu-ray™ player, from a remote display, as well as RS-232 signals at serial baud rates up to 57600 Bps.

Compatible with Tripp Lite's B160-001-DPSI, B160-001-HDSI and B160-001-VSI transmitters.

Features

Extends and Distributes VGA Video + Audio, Serial and IR Control Signals over Cat5/6 Cabling

  • Converts source video to IP-based signal transmitted to and distributed through network switch
  • Extends signal up to 328 ft. (100 m) from switch
  • Can also connect directly to transmitter up to 328 ft. away

Designed for Managed Network Switches with IGMP

  • Allows login and remote management via switch interface
  • Works with any analog or digital source, including HDMI and DisplayPort
  • Connect up to 64 transmitters and 255 receivers in single managed switch installation

Enhanced Technical Features

  • Supports video resolutions up to 1920 x 1440, including 1080p
  • Uses H.264 video compression standard
  • Transmits on 20-60 kHz IR frequency
  • Extends IR control signals that control a source from a remote display
  • Supports RS-232 serial baud rates up to 57600 Bps

Plug and Play Functionality

  • No software or drivers required
  • Hardware included for mounting on wall, rack or pole
  • Compatible with B160-001-DPSI, B160-001-HDSI and B160-001-VSI transmitters

TAA-Compliant

  • Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases

Product Information

Transource eSKU1036260946
ManufacturerTripp Lite by Eaton
Manufacturer Part NumberB160-100-VSI
Manufacturer Website Addresshttp://www.tripplite.com
Brand NameTripp Lite
Product ModelB160-100-VSI
Product NameB160-100-VSI Video Extender Receiver
Product TypeVideo Extender Receiver

Specifications

Technical Information
Connectivity TechnologyWired
Number of Output Devices Supported1
Maximum Operating Distance328.08 ft
Video
Maximum Video Resolution1920 x 1440
Interfaces/Ports
Network (RJ-45)Yes
VGA OutYes
Number of Network (RJ-45) Ports1
Number of VGA Outputs1
Media & Performance
Media Type SupportedTwisted Pair
Twisted Pair Cable StandardCategory 6
Physical Characteristics
Form FactorRack-mountable
Form FactorWall Mountable
Form FactorPole-mountable
Miscellaneous
Package Contents
  • B160-100-VSI Video Extender Receiver
  • External Power Supply w/NEMA 1-15P Plug (Input: 100-240V, 50/60 Hz, 0.5A; Output: 5V, 2A)
  • Plug Adapters for U.S., U.K., Europe and Australia
  • IR-In Cable
  • 3.5 mm to DB9 Adapter Cable (M/M)
  • Mounting Hardware
  • Owner's Manual
Environmentally FriendlyYes
Environmental CertificationRoHS
Country of OriginTaiwan
TAA CompliantYes
Warranty
Limited Warranty1 Year

The B160-100-VSI VGA Video + Audio with RS-232 Serial and IR Control over IP Receiver extends and distributes VGA video + audio, RS-232 serial and IR (infrared) remote signals through a dedicated Ethernet network switch located up to 328 feet (100 m) away. With an additional 328 feet between the switch and the transmitter (sold separately), the total maximum distance from source to display is 656 feet (200 m).

The B160-100-VSI is designed for managed network switches with IGMP, which allow login and remote management via switch interface. You can connect up to 64 transmitters and 255 receivers in a single managed switch installation.

The B160-100-VSI supports video resolutions up to 1920 x 1440, including 1080p. It works with any analog or digital source, including HDMI and DisplayPort™. It extends IR control signals that control a source, such as a Blu-ray™ player, from a remote display, as well as RS-232 signals at serial baud rates up to 57600 Bps.

Compatible with Tripp Lite's B160-001-DPSI, B160-001-HDSI and B160-001-VSI transmitters.

Features

Extends and Distributes VGA Video + Audio, Serial and IR Control Signals over Cat5/6 Cabling

  • Converts source video to IP-based signal transmitted to and distributed through network switch
  • Extends signal up to 328 ft. (100 m) from switch
  • Can also connect directly to transmitter up to 328 ft. away

Designed for Managed Network Switches with IGMP

  • Allows login and remote management via switch interface
  • Works with any analog or digital source, including HDMI and DisplayPort
  • Connect up to 64 transmitters and 255 receivers in single managed switch installation

Enhanced Technical Features

  • Supports video resolutions up to 1920 x 1440, including 1080p
  • Uses H.264 video compression standard
  • Transmits on 20-60 kHz IR frequency
  • Extends IR control signals that control a source from a remote display
  • Supports RS-232 serial baud rates up to 57600 Bps

Plug and Play Functionality

  • No software or drivers required
  • Hardware included for mounting on wall, rack or pole
  • Compatible with B160-001-DPSI, B160-001-HDSI and B160-001-VSI transmitters

TAA-Compliant

  • Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases

Product Information

Transource eSKU1036260946
ManufacturerTripp Lite by Eaton
Manufacturer Part NumberB160-100-VSI
Manufacturer Website Addresshttp://www.tripplite.com
Brand NameTripp Lite
Product ModelB160-100-VSI
Product NameB160-100-VSI Video Extender Receiver
Product TypeVideo Extender Receiver

Specifications

Technical Information
Connectivity TechnologyWired
Number of Output Devices Supported1
Maximum Operating Distance328.08 ft
Video
Maximum Video Resolution1920 x 1440
Interfaces/Ports
Network (RJ-45)Yes
VGA OutYes
Number of Network (RJ-45) Ports1
Number of VGA Outputs1
Media & Performance
Media Type SupportedTwisted Pair
Twisted Pair Cable StandardCategory 6
Physical Characteristics
Form FactorRack-mountable
Form FactorWall Mountable
Form FactorPole-mountable
Miscellaneous
Package Contents
  • B160-100-VSI Video Extender Receiver
  • External Power Supply w/NEMA 1-15P Plug (Input: 100-240V, 50/60 Hz, 0.5A; Output: 5V, 2A)
  • Plug Adapters for U.S., U.K., Europe and Australia
  • IR-In Cable
  • 3.5 mm to DB9 Adapter Cable (M/M)
  • Mounting Hardware
  • Owner's Manual
Environmentally FriendlyYes
Environmental CertificationRoHS
Country of OriginTaiwan
TAA CompliantYes
Warranty
Limited Warranty1 Year
Categories