Filters
Close

Tripp Lite VGA w/ Audio over Cat5/Cat6 Video Extender Kit Wallplate Transmitter & Receiver

Tripp Lite VGA w/ Audio over Cat5/Cat6 Video Extender Kit Wallplate Transmitter & Receiver - 1 Input Device - 1 Output Device - 1000 ft Range - 2 x Network (RJ-45) - 1 x VGA In - 1 x VGA Out - 1920 x 1440 - Twisted Pair - Category 6 - Wall Mountable - TAA Compliant
SKU: 1000262819
Manufacturer part number: B130-101A-WP-2
Free shipping
Manufacturer: Tripp Lite
Old price: $144.00
$90.63
Picture of Tripp Lite VGA w/ Audio over Cat5/Cat6 Video Extender Kit Wallplate Transmitter & Receiver
The B130-101A-WP-2 VGA with Audio over Cat5/Cat6 Extender Kit includes transmitter and receiver wallplate units that work in tandem to extend a VGA signal to to a projector, monitor or television. The kit is ideal for digital signs in schools, churches or retail applications where the video source is located farther than conventional cables allow. Attractive wallplate units eliminate cable clutter.

Because compatibility issues can occur when EDID information is not properly communicated between the source and the display, the B130-101A-WP-2 includes an EDID copy feature. This enables the transmitter to store the display's EDID information and send it to the video source, ensuring top-shelf compatibility.

The B130-101A-WP-2 can extend a 1024 x 768 (60 Hz) signal up to 1,000 feet and a 1920 x 1440 (60 Hz) signal up to 500 feet when using 24 AWG solid-wire Cat5e/6 cable, such as Tripp Lite's N022-01K-GY (Cat5) and N222-01K-GY (Cat6), to connect the two units. For optimal image quality between 500 and 1,000 feet, use zero-skew cable, such as Tripp Lite's P524-01K. The RJ45-type wallplate jacks accept standard Cat5e/6 patch cables, so no 110 punchdown connection is required.

You Can Also Connect Up To Three B132-110 Or B132-110A Remote Repeaters In A Chain (Using Cat5E/6 Cable) For A Total Of Five Vga Displays (One Local And Four Remote) And Full 1024 X 768 (60 Hz) Signal Extension Of 2,000 Feet.

Product Information

Transource eSKU1029460062
ManufacturerTripp Lite by Eaton
Manufacturer Part NumberB130-101A-WP-2
Manufacturer Website Addresshttp://www.tripplite.com
Brand NameTripp Lite
Product ModelB130-101A-WP-2
Product NameB130-101A-WP-2 Video Console/Extender
Product TypeVideo Extender Transmitter/Receiver

Specifications

Technical Information
Connectivity TechnologyWired
Number of Input Devices Supported1
Number of Output Devices Supported1
Maximum Operating Distance1000 ft
Video
Maximum Video Resolution1920 x 1440
Interfaces/Ports
Network (RJ-45)Yes
VGA InYes
VGA OutYes
Number of Network (RJ-45) Ports2
Number of VGA Inputs1
Number of VGA Outputs1
Media & Performance
Media Type SupportedTwisted Pair
Twisted Pair Cable StandardCategory 6
Physical Characteristics
Form FactorWall Mountable
Miscellaneous
Package Contents
  • Transmitter Wallplate Unit
  • Receiver Wallplate Unit
  • VGA + Audio "Y" Splitter Cable
  • Screwdriver For Adjusting Equalization And Gain
  • 2 x External power supplies (Input: 100-240V, 50/60 Hz, 0.5A; Output: 5V, 2A)
  • Wallplate Screws
  • Owner'S Manual
Environmentally FriendlyYes
Environmental CertificationRoHS
Country of OriginTaiwan
TAA CompliantYes
Warranty
Limited Warranty1 Year
The B130-101A-WP-2 VGA with Audio over Cat5/Cat6 Extender Kit includes transmitter and receiver wallplate units that work in tandem to extend a VGA signal to to a projector, monitor or television. The kit is ideal for digital signs in schools, churches or retail applications where the video source is located farther than conventional cables allow. Attractive wallplate units eliminate cable clutter.

Because compatibility issues can occur when EDID information is not properly communicated between the source and the display, the B130-101A-WP-2 includes an EDID copy feature. This enables the transmitter to store the display's EDID information and send it to the video source, ensuring top-shelf compatibility.

The B130-101A-WP-2 can extend a 1024 x 768 (60 Hz) signal up to 1,000 feet and a 1920 x 1440 (60 Hz) signal up to 500 feet when using 24 AWG solid-wire Cat5e/6 cable, such as Tripp Lite's N022-01K-GY (Cat5) and N222-01K-GY (Cat6), to connect the two units. For optimal image quality between 500 and 1,000 feet, use zero-skew cable, such as Tripp Lite's P524-01K. The RJ45-type wallplate jacks accept standard Cat5e/6 patch cables, so no 110 punchdown connection is required.

You Can Also Connect Up To Three B132-110 Or B132-110A Remote Repeaters In A Chain (Using Cat5E/6 Cable) For A Total Of Five Vga Displays (One Local And Four Remote) And Full 1024 X 768 (60 Hz) Signal Extension Of 2,000 Feet.

Product Information

Transource eSKU1029460062
ManufacturerTripp Lite by Eaton
Manufacturer Part NumberB130-101A-WP-2
Manufacturer Website Addresshttp://www.tripplite.com
Brand NameTripp Lite
Product ModelB130-101A-WP-2
Product NameB130-101A-WP-2 Video Console/Extender
Product TypeVideo Extender Transmitter/Receiver

Specifications

Technical Information
Connectivity TechnologyWired
Number of Input Devices Supported1
Number of Output Devices Supported1
Maximum Operating Distance1000 ft
Video
Maximum Video Resolution1920 x 1440
Interfaces/Ports
Network (RJ-45)Yes
VGA InYes
VGA OutYes
Number of Network (RJ-45) Ports2
Number of VGA Inputs1
Number of VGA Outputs1
Media & Performance
Media Type SupportedTwisted Pair
Twisted Pair Cable StandardCategory 6
Physical Characteristics
Form FactorWall Mountable
Miscellaneous
Package Contents
  • Transmitter Wallplate Unit
  • Receiver Wallplate Unit
  • VGA + Audio "Y" Splitter Cable
  • Screwdriver For Adjusting Equalization And Gain
  • 2 x External power supplies (Input: 100-240V, 50/60 Hz, 0.5A; Output: 5V, 2A)
  • Wallplate Screws
  • Owner'S Manual
Environmentally FriendlyYes
Environmental CertificationRoHS
Country of OriginTaiwan
TAA CompliantYes
Warranty
Limited Warranty1 Year
Categories